The F8-Distro Board is an eight port power distribution board. The board has one 30amp power input connector and eight 5A connectors. The connectors are pluggable connectors for easy connect/disconnect. LED fuse indicators (8). Connectors Included.
Falcon F-Amp with Ray Wu 13.5mm Pigtails The F-Amp with Ray Wu 13.5mm Pigtails include a male and female connector. Sealed epoxy for complete waterproof solution.
Eight pack of 3.5mm connectors. Fits F16V3, F4V3, F16V2R, F16V2 expansion boards and receivers.
Falcon F-Amp with xConnect Pigtails The F-Amp with xConnect Pigtails include a male and female connector. Sealed epoxy for complete waterproof solution.
Falcon F-Amp The Falcon F-Amp is a line buffer designed to boost the data signal that controls 3-wire pixels. The F-Amp can be attached directly to the pixel controller or can be placed some distance away from controller. Can be used with 5 or 12V 3-wire pixels.
Falcon F-Amp with CFOL/Paul Zhang Pigtails The F-Amp with CFOL/Paul Zhang Pigtails include a male and female connector. Sealed epoxy for complete waterproof solution.
.96 inch OLED Display for F16v3, F48 and F4V3
Eight pack of 2-pin 3.5mm connectors. Fits F8 distro boards and power input for F48.
Two 3-pin pixel connectors and one 2-pin power connector for Picap. The Picap comes with these connectors. These are for replacement of connectors that will ship with Picaps.
6.35mm Power Connector for F16v3, F4V3 and F16V3/F16V2 expansion board.
Latch/Data Driver for F16V3, F4V3 and Expansion Boards outputs. 20-pins