• $15.00

    The F8-Distro Board is an eight port power distribution board. The board has one 30amp power input connector and eight 5A connectors. The connectors are pluggable connectors for easy connect/disconnect.  LED fuse indicators (8). Connectors Included.

    $15.00
    In Stock
  • $6.00
    New

    .96 inch OLED Display for F16v3, F48 and F4V3

    $6.00
    In Stock
  • $3.50
    New

    40-Pin Ribbon Cable. Works with F16V2/F16V3 Expansion Boards.

    $3.50
    In Stock
  • $200.00

    Backordered - Shipping December 5th.  F16V3 Completely Assembled. 1024 pixels per output pixel controller.     

    $200.00
    October 14th
  • $13.00

    Shipping November 20th CG-1500 mounting Plate for F16V2/F16V3. The plate can be used to mount one of the following configurations to CG-1500 enclosure. Controller and expansion board. Controller and power supply. Two Power supplies.

    $13.00
    Shipping November 20th
  • $35.00

    Falcon PiCap Shipping December 3rd or earlier. 50% of of proceeds from sales of the Falcon PiCap will go to FPP development team.  All support for this product is through FalconChristmas.com user forums Can control two strings 800+ WS2811 pixels with fused and buffered outputs. Dedicated RS-485 DMX Output (Renard, DMX, LOR selectable). Input...

    $35.00
    Shipping in 1 week.
  • $22.00

    Shipping 11-27-2020  The 4-String Differential SmartReceiver Board can be connected to the F16V2, F16V3 and F4V3 Differential Expansion boards as well as the popular F48 differential controller allowing 4 strings to be placed up to 300+ feet from the controllers. Connectors Included. Note: Supports 3-wire pixels only.

    $22.00
    In Stock
  • $2.00
    New

    RS-485 Quad Driver for F16V3 and F16V3 differential expansion board. 16-pins. 

    $2.00
    Shipping 1 Week
  • $22.00

    Shipping 11-27-2020  The 4-String Differential SmartReceiver Board can be connected to the F16V2, F16V3 and F4V3 Differential Expansion boards as well as the popular F48 differential controller allowing 4 strings to be placed up to 300+ feet from the controllers. Connectors Included. Note: Supports 3-wire pixels only.

    $22.00
    In Stock
  • $15.00

    The F8-Distro Board is an eight port power distribution board. The board has one 30amp power input connector and eight 5A connectors. The connectors are pluggable connectors for easy connect/disconnect.  LED fuse indicators (8). Connectors Included.

    $15.00
    In Stock
  • $200.00

    Backordered - Shipping December 5th.  F16V3 Completely Assembled. 1024 pixels per output pixel controller.     

    $200.00
  • $35.00

    Falcon PiCap Shipping December 3rd or earlier. 50% of of proceeds from sales of the Falcon PiCap will go to FPP development team.  All support for this product is through FalconChristmas.com user forums Can control two strings 800+ WS2811 pixels with fused and buffered outputs. Dedicated RS-485 DMX Output (Renard, DMX, LOR selectable). Input...

    $35.00
  • $20.00

    Restocked October 26th Falcon F-Amp The Falcon F-Amp is a line buffer designed to boost the data signal that controls 3-wire pixels. The F-Amp can be attached directly to the pixel controller or can be placed some distance away from controller. Can be used with 5 or 12V 3-wire pixels.

    $20.00
    In Stock
  • $50.00

    The new expansion boards will have two connectors. (Not shown in image) F16v2/F16V3 Expansion Board with ribbon cable Completely Assembled. This board expands a F16v2/F16V3 pixel controller to from 16 outputs to 32 outputs. (48 ports for F16v3 if two are used). 2x20 ribbon cable (20cm) is included.           

    $50.00
    In Stock
  • $40.00

    The new expansion boards has two 40-pin connectors. The Differential Expansion Board connects the the F16V2 or F16V3 via 40-pin ribbon cable. Allows up to four receivers to be connected to controller. Comes with 40-pin ribbon cable.  

    $40.00
    In Stock
  • $13.00

    Shipping November 20th CG-1500 mounting Plate for F16V2/F16V3. The plate can be used to mount one of the following configurations to CG-1500 enclosure. Controller and expansion board. Controller and power supply. Two Power supplies.

    $13.00
  • $200.00

    F48 Completely Assembled. Can drive up to 16384 pixels.  48 Differential Outputs no local ports. Can connect up to 12 Falcon Differential Receivers.    

    $200.00
    In Stock
  • $4.00

    Eight pack of 3.5mm connectors. Fits F16V3, F4V3, F16V2R, F16V2 expansion boards and receivers.

    $4.00
    In Stock