Restocked October 26th Falcon F-Amp The Falcon F-Amp is a line buffer designed to boost the data signal that controls 3-wire pixels. The F-Amp can be attached directly to the pixel controller or can be placed some distance away from controller. Can be used with 5 or 12V 3-wire pixels.
Restocked October 26th Falcon F-Amp with xConnect Pigtails The F-Amp with xConnect Pigtails include a male and female connector. Sealed epoxy for complete waterproof solution.
6.35mm Power Connector for F16v3, F4V3 and F16V3/F16V2 expansion board.
The new expansion boards has two 40-pin connectors. The Differential Expansion Board connects the the F16V2 or F16V3 via 40-pin ribbon cable. Allows up to four receivers to be connected to controller. Comes with 40-pin ribbon cable. Dimensional Drawing
The F8-Distro Board is an eight port power distribution board. The board has one 30amp power input connector and eight 5A connectors. The connectors are pluggable connectors for easy connect/disconnect. LED fuse indicators (8). Connectors Included.
Shipping March 22nd The new expansion boards will have two connectors. (Not shown in image) F16v2/F16V3 Expansion Board with ribbon cable Completely Assembled. This board expands a F16v2/F16V3 pixel controller to from 16 outputs to 32 outputs. (48 ports for F16v3 if two are used). 2x20 ribbon cable (20cm) is included. Dimensional Drawing
Shipping March 12th for all new orders. The 4-String Differential SmartReceiver Board can be connected to the F16V2, F16V3 and F4V3 Differential Expansion boards as well as the popular F48 differential controller allowing 4 strings to be placed up to 300+ feet from the controllers. Connectors Included. Note: Supports 3-wire pixels only.
Expansion Boards and Receivers